If you’ve ever spent 20 minutes applying lashes and still ended up with a gap at the inner corner, you’re not alone. Gaps don’t happen because your eye is uneven. They happen because of how tapered lashes are cut and placed. Once you understand that, you’ll never struggle again.

Why Gaps Happen with Tapered Lashes

A tapered lash means each fiber gets thinner at the end. The band is often angled, so when you press it straight onto your lash line, the ends lift. Also, the inner corner of the eye has a sharper curve, so the band’s plastic memory doesn’t conform. A standard strip is usually about 2.4cm across, but the inner corner often needs a 1–2mm bend. When you skip that step, you get that tiny pocket of skin between the lash and your eye. As many reviewers say, “I’ve tried everything but they always look separate at the inner corner.” That’s because the lash is being applied as if your eye is flat. It’s not.

The 5-Step Gap-Free Application Method

1. Measure and trim from the outer edge. Cut off 2–3 millimeters at a time. Never cut the inner edge — that’s where the taper is steepest.
2. Bend the band into a horseshoe shape and hold for 10 seconds. This breaks the factory curve and lets it follow your eye.
3. Apply a thin layer of adhesive to the band and wait 30 seconds until it’s tacky. This is the secret to no slipping.
4. Place the center of the strip on your lash line first, then press the outer corner, then the inner corner. Doing it in this order keeps the band aligned.
5. Press the inner corner down with your finger (or tweezers) for another 5 seconds. Your eye’s natural warmth will make the band mold into place.

Pro Tips for Tricky Corners

• For inner corners: if you have hooded or deep-set eyes, cut the lash shorter and place it 2mm away from the corner instead of pushing it all the way in.
• For outer corners: let the lash end slightly before the corner of your eye. This prevents a “wing” effect for everyday wear.
• Use tweezers with a flat edge. The flatter the better to hold the band without pulling.
• If you wear eye makeup, coat the inner corner of your lash line with a tiny bit of adhesive and let it dry clear. This acts as a seal.
• Always curl your natural lashes first. Tapered lashes blend best when they meet your own lashes at the same curve.

Tapered Lash Styles Compared

Style	Taper Shape	Band Thickness	Best For	Wear Time
Wispy Flare	Soft 0.07mm taper	0.03mm	Everyday wear	8–10 hours
Natural Silk	0.10mm taper	0.04mm	Work + social	10–12 hours
Volume Taper	0.15mm taper	0.02mm	Special occasions	6–8 hours
Scalloped	Taper in a wave	0.03mm	Sensitive eyes	8 hours

What to Look for in a Tapered Lash

You now know the application steps. But the lash itself matters just as much. Look for a band that’s flexible enough to bend without snapping. Make sure the taper goes all the way to the tip — the thin end should be nearly transparent when you hold it against light. And pick a lash that reviewers describe as “so lightweight I forgot it was there.” When a lash is truly tapered and well made, you shouldn’t need heavy glue or major pressing. It should sit down like it was born there.

PHANSTA LASHES are made exactly this way. The tapered tips are hand-tied, and the 0.03mm band molds to your lash line after just a few seconds. That’s why so many customers say they apply in under two minutes — without gaps.

📚 Browse our complete library of lash guides →