How to Get Full Coverage Without Falsies on the Inner Corner

That annoying gap you see when you look in the mirror after applying a strip lash? It's not your fault. The inner corner of the eye naturally turns inward, and the skin there is even slightly different from the rest of your lash line. That's why strip lashes so often lift or just don't reach that little area, leaving a bare patch that ruins the whole "full coverage" illusion.

The good news is you don't need to glue on individual falsies for that inner corner unless you want to. There's a way to make the strip lash itself cover the entire length, so you get the look of one seamless, beautiful line of lashes.

WHY STRIP LASHES DON'T COVER THE INNER CORNER

The main culprit is the shape of the lash band. Most commercial lash bands are straight or slightly curved in the middle, but they're not curved enough at the inner tip. When you place the lash on your eye, the inner edge rests on the curved inner corner of your eyelid, and that corner is where the band is still trying to be straight. The result is a tiny lift—or a visible gap.

Another reason is eye moisture. The inner corner is close to your tear duct, so it's often a little wetter than the middle of the lid. Glue doesn't stick to wet skin, and even if it does temporarily, it breaks down faster.

THE 4-STEP TRICK TO FULL INNER-CORNER COVERAGE

Measure the lash exactly, then cut it slightly shorter. Instead of trailing the band to your very inner corner, cut it so it stops about 1–2 mm before the edge. This gives your natural lashes room to blend, so it looks like the lash extends all the way without the band itself trying to cling to that slippery spot.
Apply glue to the inner half of the band only. Wait for the glue to become tacky. That inner area needs a little more time to set, so let it sit for 30–35 seconds rather than the usual 20.
Place the lash slightly above the lash line at the inner corner. You purposely don't want the band physically touching the inner corner skin. Instead, tuck the band into the roots of your natural lashes there. That way the natural lashes cover the band, and the strip lash becomes an extension of your lash rather than a separate sticker.
Pinch the inner corner for 10 full seconds. Use your index finger and thumb to press the band and your natural lashes together. This bonds them, so the inner corner doesn't lift when you blink.

HOW TO TRIM A LASH BAND SO IT FITS YOUR INNER CORNER

Here's the key trick that changed how I apply lashes. Instead of trimming the band evenly across, try trimming only the inner edge at a tiny upward angle. This releases the tension on that inner corner. You'll feel it align with your eye shape naturally. Then, before applying, bend the inner edge of the band upward a little with your fingers. This pre-curves it to fit the rounded angle of your eye, and the glue will lock it into that shape.

WHAT TO LOOK FOR IN A LASH THAT WON'T LEAVE GAPS

Look for a lash where the individual lashes already begin near the very inner edge of the band. Some styles start the individual lash fibers a little later, leaving a half-centimeter of empty band. If you hold a lash to your eye and the band extends beyond the first lash, that's going to be your problem. Check for lash styles described as "full length" or "eye-opening"—those often have coverage all the way to the inner corner.

LASHES THAT MAKE THE INNER CORNER DISAPPEAR

I have found that the PHANSTA LASHES collection pays special attention to this inner-corner issue. Their band material is a little softer at the edges, so it conforms to the curve of your eye much faster than stiffer materials. And their lash styles keep the individual lash fibers running all the way to the inner tip, which eliminates the gap before it begins. My personal favorite is their Full Cover style—it genuinely looks like your own lashes but better.

Shop Lashes for Full Coverage

Frequently Asked Questions

Can I fix the inner corner without special lashes?Yes, use the trimming and pressing technique described above. It works with nearly any lash that has a flexible band.

How long does it take to get good at placing the inner corner?On average, two or three careful attempts is enough. The trick is you need to stop rushing the 10-second pinch.

Does the inner corner need more glue?Not in volume. It needs tackier glue and lengthier press time. A tiny amount that you let get tacky for an extra five seconds is more effective than a large wet dot.

Full-coverage lash	Regular strip lash
Lashes extend to the inner tip	Often stops short of the inner corner
Softer inner edge conforms easily	Stiffer band tends to lift
Designed for seamless blending	May need manual padding